The filling machine is widely used in medicine, chemical industry, food, beverage, grease, cosmetics and other industries. the gear pump head of the magnetic pump filling machine is driven by magnetic force, the pump wheel is connected with the motor without shaft, and the pump head is made of 316L stainless steel, which is acid and alkali resistant and corrosion resistant. it is suitable for filling all flowable liquids, especially for filling oils, washing liquids, acid and alkali liquids and highly corrosive liquids, with stable and reliable performance and long service life.
This machine is a heating and stirring equipment suitable for melting and mixing aqua, solution, paste, lipstick, paraffin and other substances. It is suitable for small batch production of lipstick, laboratory trial production of cosmetics, food and medicine and other industries. This machine adopts all stainless steel shell, which is beautiful in appearance, easy to clean and convenient to operate. When the processed material is solid, it needs to be heated until the material is dissolved before stirring, otherwise the motor may be burned. When water is used as heating medium, it can be heated up to below 100℃. If it is necessary to reach above 100℃, heat conduction oil can be used as heating medium. The maximum heating temperature of this machine is 300℃. To ensure life safety, the shell must be grounded.
The filling machine controls the filling time, motor speed and other factors of micro water pump by microcomputer, so as to achieve a uniform liquid filling method with small repetition error. It is widely used in medicine, chemical industry, food, beverage, grease, cosmetics and other industries. It is suitable for small batch production of liquid with low viscosity, no particles and good fluidity, and is not suitable for liquid with corrosion, acid and alkali. The pump combines the advantages of self-priming pump and chemical pump, and has the advantages of self-priming function, thermal protection, stable operation, long-time continuous idling and long-time continuous load operation.
Manual filling machine is a manual piston liquid filling machine, which can fill paste/liquid substances, such as liquid medicine,liquid food, lubricating oil, shampoo and so on. Suitable for food and special industries, with simple and reasonable structureand convenient manual operation. This equipment is not suitable for liquid flow with particulate impurities or extremely poor fluidity.